What are boards at edge of roof called?

All the boards running along the edge of the roof or eaves. Also known as a fascia.

What is the wood at the edge of the roof called?

Cornice—The wood or metal finishing at ends or edges of a building, including a fascia, frieze, or rake. Counterflashing—The flashing that is embedded, or attached, and sealed at its top in a wall or other vertical structure and is lapped down over base flashing.

What are boards under eaves called?

Soffits are boards used to close off the underside of common rafters when used in roof construction. Also known as soffit boards, they are mostly fixed horizontally but occasionally they can be fixed directly to the underside of the common rafter in which case they are known as sloping soffits.

What is the roof border called?

Eave: An eave is the lower border of the roof that overhangs the wall usually located in the first three feet of a roof. Undereave vent: Undereave vents are intake vents located under the eaves of the roof that help draw cool dry air into the attic.

INTERESTING:  Frequent question: What is a premium roof?

What are the slats on a roof called?

Louvers: Slatted devices installed in a gable or soffit (the underside of eaves) to ventilate the space below a roof deck and equalize air temperature and moisture. Open Valley: A valley where the flashing is exposed to the weather. often is used as a substitute for plywood sheets.

What is the fascia board?

The fascia board is the long wooden board behind the gutters on a house. It connects to the roof rafters, closes off the attic and serves as the mount for gutters. … A damaged fascia can be the starting point for other roof problems and potentially lead to damage to an attic and home.

What is a roof rake edge?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.

What are Fisher boards?

Fascia (/ˈfeɪʃə/) is an architectural term for a vertical frieze or band under a roof edge, or which forms the outer surface of a cornice, visible to an observer. … The horizontal “fascia board” which caps the end of rafters outside a building may be used to hold the rain gutter.

What is the difference between fascia and barge board?

Bargeboards and fascia boards are essentially the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Bargeboards run diagonally and are located at the gable end of a property.

INTERESTING:  Question: What is the best flooring for roof terrace?

What is the difference between fascia and soffits?

Typically a soffit is used in the area beneath the eaves on the exterior of a house to close the space beneath the eave. The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside.

What is a roof apex?

An apex roof has two slopes, which both meet in the middle – the highest point of the roof. … The front of the timber building is most commonly the side with the highest point of the pent roof and it then descends to the back.

What are the parts of a shed roof called?

There are two basic ways to frame a shed roof. The traditional method is to cut and install all the parts—rafters, ridge board, collar ties, and ceiling joists—one board at a time.

What is roof trim?

Metal roofing trim is one of the most overlooked components of a metal roof. Unless one looks closely at the joints, as well as near the eaves and gutters, it’s rarely seen. Trim is what seals joints and drip edges, and keeps moisture from penetrating your home.

What is a roof lap?

Lap: To cover the surface of one shingle or roll with another. Lap cement: An asphalt-based cement used to adhere overlapping plies of roll roofing.

What are the timbers in a roof called?

Rafters. Sometimes referred to as common rafters or spars, these inclined lengths of timber rise from the eaves at the bottom of the roof to the ridge apex at the top. Rafters support a pitched roof covering.

INTERESTING:  When should you rake snow off your roof?

What is roof Valley?

A roof valley is formed where two roof slopes meet. Water collects in a valley to flow off the roof. Your choice of valley installation method is critical because, when improperly installed, valleys are risks for serious leaks. Essentially, there are three main ways to shingle a roof valley: woven, closed-cut and open.