Your question: What wind speed is dangerous for roof work?

Most of the work undertaken by roofers must stop at 23 mph (10 m/s), and many other activities have a lower limit of 17 mph (7.7 m/s).

Can roofers work in high winds?

Working on roofs is the riskiest type of work at height, especially when it’s windy – wind speed can pose a real danger to anybody working on a roof, no matter what the conditions at ground level are like.

At what wind speed should you not work on a roof?

All laying or handling of slates, tiles, battens and felt at roof level should cease when the (average) mean wind speed reaches 23 mph (gusting to 35 mph or over). When handling rolls of felt at roof level, extreme care should be taken when the mean wind speeds are in the region of 17 mph (gusting to 26 mph or over).

What wind speed can Scaffolders work in?

Once the stormy weather begins there is little that can be done other than wait for the wind to subside. It should go without saying that scaffolds should not be used (18 m/s or 40 mph being the usual maximum speed before work is stopped completely).

INTERESTING:  Why do they say tin roof rusted?

What does OSHA consider high winds?

Note to the definition of “high wind”: The Occupational Safety and Health Administration normally considers winds exceeding 64.4 kilometers per hour (40 miles per hour), or 48.3 kilometers per hour (30 miles per hour) if the work involves material handling, as meeting this criteria, unless the employer takes …

What are legal responsibilities when working on roofs?

a. The person who is in control of a workplace is responsible for ensuring that the access from the ground to the work area on the roof is safe and without risk to health. b. Access requirements should take into account any tools and equipment the roof worker may be required to carry to and from the work site.

What is classed as high winds UK?

55-63 Mph 89-102 kph 48-55 knots Whole Gale or Storm Trees are broken or uprooted, building damage is considerable. Large waves (6-9 meters), overhanging crests, sea becomes white with foam, heavy rolling, reduced visibility. 64-72 Mph 103- 117 kph 56-63 knots Violent Storm Extensive widespread damage.

Can roofers work without scaffolding?

Roofing repairs do not always need to be done by a professional but they nonetheless pose difficulties when it comes to both access and safety. Much of the official health and safety advice states that, for any domestic roof repairs, scaffolding is needed.

What wind speed should you not work on scaffolding?

Never use a suspended scaffold in high winds or during storms. At minimum, do not work on the scaffold when winds are in excess of 25 MPH on the wall.

INTERESTING:  How do you seal an old shingle roof?

Is scaffolding safe in high winds?

Should scaffolding be affected by the weather? No! … Simply put, during windy or stormy conditions, a scaffold structure should always remain intact and not blown over.

How high can you work without scaffolding?

In the general industry, the height requirement for scaffolding is 4 feet above a lower level. For construction work, the height requirement is 6 feet above a lower level. All workers 10 feet above a lower level must have fall protection.

What are the standards of OSHA?

OSHA standards are rules that describe the methods that employers must use to protect their employees from hazards. There are four groups of OSHA standards: General Industry, Construction, Maritime, and Agriculture. (General Industry is the set that applies to the largest number of workers and worksites).