How much does it cost to lay a rubber roof?

Membrane Rubber Roofing Prices. Expect to spend anywhere between $3.25 and $14.00 per square foot for material and installation. However, it will usually average between $4.50 and $5.50 per square foot. Rubber Roofing Contractors tend to charge between $75 and $90 per hour on top of materials.

How much does it cost to put a rubber roof on?

Rubber roofing costs anywhere between $8,000 to $14,000 to install depending on the slope, pitch, and size of your roof. You can expect to pay $4.25 to $8.25 per sq. foot or $425 to $8825 per square installed on a standard sized single story home.

How many years does a rubber roof last?

How Long Do Rubber Roofs Last? Rubber roofing, when installed professionally, can last 25 years or more. TPO and EPDM roof systems have similar lifespans of 20 to 25 years. High-quality TPO roofing that is reinforced with fiberglass can last even longer.

Are rubber flat roofs any good?

Rubber roofing is extremely durable. It isn’t prone to moss or algae growing on it or prone to being damaged. An EPDM roof is very easy and cost-effective to repair too. Compared to other materials, there are fewer seams, meaning it’s extremely rare for a rubber roof to leak.

INTERESTING:  Where are hip and valley roofs most common?

What is the cost of EPDM roofing per square foot?

The Cost of an EPDM Roof

If you decide to go with an EPDM roof installation, you should expect to pay somewhere between $4 to $8 per square foot which works out to be about $6,000 to $12,000 for 1,500 square feet of roof.

How long does it take to install a rubber roof?

How Long Does It Take to Replace a Rubber Roof? Roofers tend to take only 1-2 days to replace a rubber roof. The lightweight material has fire resistance and a single-piece construction with fewer seams. Contractors lay the rubber membrane and roofing down in large sections.

Is a rubber roof better than shingles?

Rubber shingles or rolls are much stronger and less likely to crack during extreme weather conditions than asphalt roofing. They are especially beneficial for flat or low-pitch roofs that traditional shingles have trouble effectively protecting due to the lack of gravitational pull.

Does a rubber roof smell?

One of the issues that many people have with other types of roof coatings is the odor. They have rather unpleasant scents that leave a toxic tinge in the air. … One of the other nice things about the EPDM rubber roof is the fact that it does not have the nasty odor typically associated with coatings.

How do I estimate roofing costs?

Simply measure length (A) x width (B): A x B = 120′ x 100′ = 12,000 sq. ft. for the total square footage of the roof.

Is rubber roofing more expensive than shingles?

When comparing the price of rubber roofing with that of asphalt roofing, rubber roofing typically costs $300 to $400 per square, at the time of publication. … Although rubber roofing is more expensive, it usually lasts twice as long as asphalt shingles and additionally saves on energy costs.

INTERESTING:  Quick Answer: What advantages do green roofs provide over standard low slope roof treatments?

How much does it cost to replace a roof on a 1 200 square foot house?

To begin, depending on where you live, replacing the roof on a 2,000 square foot home costs between $6,198 and $13,594. Of course, this includes fully installing asphalt shingles on your house as well. This estimate is especially useful for those of you who are looking to buy a new shingle roof.

Can you walk on a rubber flat roof?

An EPDM flat rubber roof is capable of withstanding light foot traffic. … However, if you require to walk over the EPDM roof regularly, there are ways to reinforce for surface and ensure that the integrity of the roof isn’t affected by regular foot traffic.

What are common problems with EPDM roofs?

Three most common problems with Rubber Roofs is improper installation, shrinkage and the seams. While the rubber roofs are known to be durable, they also need maintained. EPDM roofs are fully adhered or as many call it glued down. The system is not attached mechanically.

What goes under a rubber roof?

There are three different types of single-ply underlayment: thermoplastic polyolefin (TPO), polyvinyl chloride (PVC), and ethylene propylene diene monomer (EPDM). If you’re considering EPDM rubber membrane for flat roof installation, here what you need to know.