The average roofing installation price for a standing seam metal roof costs anywhere between $23,000 to $30,000 depending on the slope, pitch, and size of your roof. You can expect to pay $8 to $14 per sq. foot or $800 to $1,400 per square installed on a standard sized single story home.
How much does standing seam roof cost installed?
Standing seam metal roofing is one of the most expensive roofing options. A full installation typically costs between $18,000 and $41,000, or $29,000 on average.
Is standing seam roof worth the money?
The upfront cost is often on the high-end for all types of residential metals roofs. Standing seam is far costlier than a conventional roofing system like asphalt shingles. However, standing seam offers far greater value and will last two to three times longer than a typical asphalt roof.
How much does it cost to put a metal roof on a 1500 square foot house?
For an average-sized roof measuring 1,500 square feet, this adds up to a total average material cost of between $4,875 and $8,625.
How much does it cost to put a metal roof on a 1700 square foot house?
These metal panels cost between $1 and $2.50 per square foot for the raw materials, or between $5.50 and $11.50 for materials plus installation costs. For a 1,700-square-foot roof, the total metal roofing cost comes out to about $9,350 to $19,500.
Why is standing seam so expensive?
Consequently, standing seam panels install more slowly than exposed fastener panels, and additional contractor labor is also a factor in their higher cost. … With each piece comes the part’s cost, additional labor to handle and install, and often extra tape sealants between each layer.
Why are standing seam roofs expensive?
These estimates include: removal of one layer of old shingles, all material and labor costs, and dump fees. On average, you can expect to pay 25-35% more for standing seam than you would for metal shingles. The total is higher, because the process of installation is a lot more complex and involved.
Can you walk on a standing seam metal roof?
Standing seam roofing can be walked on pretty much anywhere without damaging it. Metal tile roofing (ribbed panels that resemble ceramic tile or shake) should be walked on in the lower spots, closer to the roof decking. Corrugated panels are also safe to walk on as those are screwed right onto the roof decking.
Do standing seam metal roofs leak?
Even if you have higher-density and durability standing seam metal, they can leak and suffer from damages over time.
How long will a standing seam roof last?
As long as it’s properly installed and your attic is adequately ventilated, there’s no reason you shouldn’t get at least 30 years out of your new standing seam metal roof. Under the ideal conditions, your new standing seam metal roof could live for 50 years.
What is the labor cost to install metal roofing?
While roofing labor costs vary all over the United States, most local roofing contractors charge $40 to $80 per hour. But in most cases, new metal roof installations are charged by project or by square foot. Expect to pay between $7 to $14 per square foot in most areas.
What is the cheapest metal roofing?
Corrugated metal roofing is the cheapest metal roofing. This type of roofing is typically made from galvanized steel, which is the most common steel roofing type. Corrugated metal roofing costs between $1.80 and $2.50 per square foot.
How much does it cost to put metal roof on Mobile Home?
Metal roofing materials cost about $1,000-$2,000 for a single-wide or $1,800-$3,000 for a double-wide, depending on size of unit and manufacturer and are designed to last a lifetime. Metal roofs may be installed over an existing roof with or without a DIYer adding insulation in between.
Is a metal roof worth the extra cost?
Metal roofs can be as much as two or three times more expensive than other roofing materials. While the life of a metal roof is much longer, investing in a metal roof only makes sense if you plan to stay in your home long enough to enjoy the cost benefits. Noisiness.
Is it cheaper to get a metal roof or shingles?
Not only do the metal panels themselves cost more than asphalt shingles, but a metal roof also requires more skill and labor to install. You can actually expect the cost of a metal roof to be more than double or triple the cost of an asphalt shingle roof.
How do I estimate the cost of a metal roof?
Divide the length of your roof by the width of the metal. In our example we will use 24-inch standing seam roofing, so we will divide 360 inches by 24, which equals 15. This is the number of metal panels needed for one side of the roof.