How many squares are in a roll of TPO roof?

How many squares are in a roll of TPO?

Systems offered: PVC, TPO. Roll sizes (length and width): PVC (custom fabricated) maximum 100-foot length and up to a total of 1,800 square feet and roll goods. TPO roll goods 6 feet, 8 feet, 10 feet and 12 feet wide.

How much does a 10 ft roll of TPO weigh?

UL Listed, FM Approved, Dade County Product Approval, Florida Building Code Approved, CRRC Listed, Title 24 Compliant, ENERGY STAR® Listed, ASTM D6878. 10′ x 100′ 322 lbs.

How much is a square of TPO roofing?

A square is 100 square feet of roofing material, and your TPO roofing cost estimate may be quoted in squares. Experts find that one square foot of TPO roofing can range from $3.50 to $14.00. That would mean a square of TPO could range in price from $350 to $1,400.

What is a 60 mil TPO roof?

TPO is a type of roofing membrane that can come in a variety of thicknesses. The most common thickness is probably 60 mils. (A mil is a unit of measure where 1-mil is equal to 0.001 inches. So, a 45-mil roofing membrane is actually 0.045 inches thick; whereas a 60-mil membrane is 0.06 inches thick, and so on.)

INTERESTING:  How long does it take to get a roof estimate?

How wide is TPO roofing?

TPO roofing systems are made up of a single layer of synthetics and reinforcing scrim that can be used to cover flat roofs. TPO membranes are manufactured in sheets that are 10, 12, or 20 feet wide. These sheets are then rolled up and taken to the commercial facility.

What is better TPO or PVC?

While PVC offers better resistance to puncture and weathering, TPO (like PVC) is recyclable and environmentally friendly. … However, TPO is also less resistant to chemicals than PVC, so it is not the optimal choice where grease or harsh chemicals are involved.

How much is a roll of TPO cost?

Roof

Material Quantity Unit Price
GenFlex 60 mil TPO (10′ x 100′) 2 rolls $562.50
GenFlex Peel & Stick Flashing (12″ x 25′) 1 roll $178.87
GenFlex Peel & Stick Cover Tape (6″ x 100′) 3 rolls $257.75
GenFlex Peel & Stick TPO Pipe Boot (1″-6″) 2 pcs. $33.44

What is the difference between TPO and EPDM?

TPO roofing reflects sunlight, allowing commercial air conditioners to work more efficiently; whereas EPDM has a dark surface, which in summer conditions will absorb heat, forcing cooling systems to work overtime. TPO offers reduced cooling costs and energy savings for facilities located in warmer climates.

How long does TPO roof last?

A TPO roof membrane can last anywhere from 15 to 20 years. It is a single ply reflective roofing option, and it is typically adhered or mechanically attached. This membrane can be left exposed throughout its life.

Can you walk on TPO roof?

Flat Roof Surfaces You Can Walk On

Whether its BUR (Built-up Roofing), TPO (Thermoplastic polyolefin), Modified Bitumen, or Single Ply Roofing, your roofing professional can apply the right waterproofing membrane to make it possible to walk on.

INTERESTING:  Question: How much does it cost to convert a flat roof to pitched?

Is a TPO roof good?

There are a plethora of benefits to implementing a TPO roofing system onto your current commercial roof. It has great strength, durability, and flexibility. That means being able to stand up to a build-up of dirt, resistance to tears, and mold growth as well. Perhaps its best trait is that it is energy efficient.

How thick is a TPO roof?

TPO is typically sold in thicknesses of 45 mil, 60 mil and 90 mil. In Indiana, we typically see 45 mil and 60 mil specified. The thicker the membrane, the better the long term durability.

Does TPO need underlayment?

Unlike EPDM, most TPO roofing membranes are white. … TPO roofs can resist UV rays by reflecting the light off its surface. This makes TPO ideal for buildings that need an effective insulation system. TPO underlayment is relatively easier to install.

What is the minimum slope for a TPO roof?

Thermoplastic single-ply roofing systems are plastic sheets (PVC, TPO, CSPE) that are welded together with hot air. This creates a shingle sheet that provides the weather protection for the building. Both the Thermoset and the Thermoplastic must be installed at a minimum one- fourth-inch-per-twelve-inch slope.