Frequent question: What is the name of the board that faces down that covers the underside of the roof overhang?

Soffit—The area that encloses the underside of that portion of the roof that extends out beyond the sidewalls of the house.

What is the board under the eaves called?

SOFFIT – The lining installed under the eaves between the fascia board and external wall.

What is the board under the soffit?

Fascia is the board that runs along the ends of a structure to which exterior elements such as guttering is attached. The horizontal pieces that cover the space between the soffit and the roof are the fascia boards.

What is the area under the gutters called?

Fascia. … Specifically, used to describe the horizontal “fascia board” which caps the end of rafters outside a building, which can be used to hold the rain gutter. The finished surface below the fascia and rafters is called the soffit or eave.

What is roof edging called?

The eaves

The eaves are the edges of the roof which overhang a vertical external wall and, normally, they jut out over the side of a building creating an overhang, so rainwater stays clear of the walls.

INTERESTING:  What angle is a low pitch roof?

What are Fisher boards?

Fascia (/ˈfeɪʃə/) is an architectural term for a vertical frieze or band under a roof edge, or which forms the outer surface of a cornice, visible to an observer. … The horizontal “fascia board” which caps the end of rafters outside a building may be used to hold the rain gutter.

What’s the difference between eaves and soffits?

In the widest sense of the term, soffits can refer to the underside of almost anything that’s constructed, including arches and porches. Another way to explain it is to say soffit is the exposed siding underneath your roof’s overhang. … To summarise, an eave is part of a roof system and a soffit is part of the eave.

What are soffits and fascia boards?

Soffits are the flat boards that cover an overhanging roof from the underside. They’re attached to the lower end of fascia boards and cover the area between the external wall and the fascia to protect the exposed part of the roof.

What is fascia board made of?

Fascia is normally made of timber or wood, but can be found in PVC, aluminum, and vinyl as well. It’s typically installed at the same time as your roof or gutters in order to help complete this area of the home. Some homes may not use a fascia board.

What are frieze boards?

Frieze board is a type of trim that is typically installed between the top of a home’s siding and the soffit. It’s normally installed flat against the home, but it may be installed at an angle if installed on a gable. Frieze board may also be used as a decorative, horizontal trim anywhere in or on the home.

INTERESTING:  How do I get experience on my roof?

What is a verge board?

(ˈbɑːdʒˌbɔːd ) noun. a board, often decorated with carved ornaments, placed along the gable end of a roof. Also called: vergeboard.

What is a roof apex?

An apex roof has two slopes, which both meet in the middle – the highest point of the roof. … The front of the timber building is most commonly the side with the highest point of the pent roof and it then descends to the back.

What are the roof parts called?

Ridge: This is the top or peak of the roof, where two roof planes meet. Valley: This is where two pitched roof faces connect and project inward. They are always at a lower slope than the adjoining roof planes. Dormer: This is a roof feature that projects out from the roof face.

What is a roof rake edge?

Simply put, a roof rake edge is installed to cover the top edge of the siding where it meets the roof. You can think of it as a type of awning that is designed to allow water to flow off the roof and down onto the ground below, instead of down the side of your home.