Attic baffles, or rafter vents, are an essential part of keeping your home well-ventilated and reducing the moisture on top of your house. If you want a well-ventilated attic that doesn’t regularly grow mold for you to remove, you’ll want to make sure your home is properly aired out.
Do you need baffles If you have a ridge vent?
In this case, most building codes require the installation of baffles, sometimes called rafter vents, that provide at least 1 inch of free continuous space on the underside of the roof deck, between the rafters. Air must flow into the soffit vents, rise through the baffles and exit through the ridge vent.
Do you need baffles with blown in insulation?
Unfortunately, blow-in insulation can drift into the vents and block the flow of air. The solution is to install rectangular attic baffles, formed to fit between the rafters. Cardboard or thin plastic baffles allow the air to flow into the attic, yet serve as a dam to hold blow-in insulation in the attic.
Do I need baffles if I don’t have soffit vents?
But not all homes have an overhanging roof line or soffit vents. Without them it is actually easier to insulate your attic, because you do not have to worry about covering up the vents or installing rafter baffles to ensure the vents breathe.
What are roof baffles for?
Baffles are chutes that, when installed properly, can provide a channel for air to flow from your exterior soffit vents up into your attic space. That airflow is intended to churn the stale air in your attic which helps to remove moisture and control the temperature of your attic.
Do I need baffles in every rafter?
Attic venting baffles channel the air from outside, continuing the circulation. This is what keeps your home cooler. So, while rafter air channels are not required between every rafter, they are necessary for each air intake piece.
Do you need rafter Vents?
To get the best performance out of your insulation year in, year out, you would do well to install rafter vents in your attic. … That air flow helps keep the attic cooler during the summer, and during the winter, it helps keep ice from forming on the edge of the roof. It also guards against mold, mildew, and rot.
Why do we need attic baffles?
But the truth is that your roof, particularly the attic, must be properly ventilated with outside air to perform its best. Attic baffles help to promote attic ventilation. … When it does that, it removes damp, stagnant attic air and replaces it with clean dry air.
How many baffles go in an attic?
The first step in determining how many rafter vents your home needs is to determine your home’s vent space in square feet. The general rule is that you must have one square foot of vent space for every 150 square feet of attic area.
Where do you put Rafter Vents?
Rafter vents should be placed in your attic ceiling in between the rafters at the point where your attic ceiling meets your attic floor. Once they are in place, you can then place the batts or blankets, or blow insulation, right out to the very edge of the attic floor.
Will soffit vents work without a ridge vent?
Ridge vents can work without soffit vents, however, this won’t be very energy efficient. Without soffit vents, the ridge vents will draw air from some other inlet on the roof like a gable, but this will limit the extent of air circulation in the attic.
Are soffit vents necessary?
A roof may need soffit vents if there is no other ventilation allowing for adequate air movement. However, if the attic space is properly sealed and insulated, there is no need for this type of ventilation. … Soffit vents are an easy, aesthetically pleasing way to vent the attic space.
Should attic be vented?
In the summer, good attic ventilation reduces heat buildup. That cuts cooling costs and prolongs shingle life. In the winter, warm, moist air seeps into the attic from the living space below. … If you don’t see any attic vents on the roof or in the eaves, you need to add some.
How many roof vents do I need calculator?
Most codes use the 1/300 rule for minimum residential attic ventilation recommendations. This means that for every 300 square feet of enclosed attic space, 1 square foot of ventilation is required – with half at the upper portion (exhaust vents) and half in the lower portion (intake vents).